The Steps you Need to Follow for the hack to work:
1.First unplug the Adapter of your STB2.Remove your View Card from the back of the STB
3. Turn On the STB and Insert the View card
4. When the three LEDS on the STB starts to blink together, You will get a Please wait Initializing message
5. Immediately press the Exit key on your remote two times and enter 2465
6. The STB will start Automatic downloading of the new software
7. Wait for this to finish and Dont Cut the Power, You must update the STB for the Proper Orientation of the FTA channels

8. After the Up-gradation the STB will automatically restart
9. Remove your Dish cable from the Back of the STB
10. Now you will see installation setup
11. The first satellite will be NES7, Change the second one to "OTHER" under the FTA settings
12. Now try Scaning for FTA always use Quick scan
13. Try changing the Symbol rate and Frequencies
14. If you get any channel press save and it can be viewed after the channel 999.
0 comments:
Post a Comment
Comments must be related to the above Article. Don't SPAM.